Default MIDI input response Komplete Kontrol/Maschine/...

Wouter De Muynck · 2023-07-26T17:07:07+00:00

There was an error rendering this rich post.

Hello,

I'm using an external MIDI foot controller with 2 expression pedals connected to it to be able to control the parameters of NI instruments. I'm using Midi channel 1 - CC number 10 and 11 at the moment to achieve that. In combination I'm loading Ashlight in Komplete Kontrol and I'm using Learn-mode in the Global section to assign an expression pedal to the X and Y axis of Ashlight. This is all working, but the expression pedals also control the volume (cc number 7) or panning (cc number 10). So I was wandering where I can find an overview of the default MIDI settings to which Komplete Kontrol is responding, and maybe other NI products (?).

Thanks,

Wouter

Find more posts tagged with

Accepted answers

Uwe303

Hello,

have you tried to give the pedals another cc number, lets say 14,15 or 20 to 31, those cc´s are not defined in the standard midi implementation, so they should not collide with other stuff.

MIDI CC List (Continuous Controllers) | Another Producer

All comments

Uwe303

Hello,

have you tried to give the pedals another cc number, lets say 14,15 or 20 to 31, those cc´s are not defined in the standard midi implementation, so they should not collide with other stuff.

MIDI CC List (Continuous Controllers) | Another Producer

Wouter De Muynck

@Uwe303 , thanks for the reply and the link! I will have look and see what's happening when I change the cc values to non defined values.

Keep you posted,

Wouter

Wouter De Muynck

@Uwe303 , works like a charm! Apparently I can add multiple cc values to the same expression pedal, so I can combine pre-defined and free cc values to the same pedal or combine the X and Y also into 1 pedal. The list was indeed very helpful, thanks for that! I added a bookmark 😊

Grtz,

Wouter

Quick links

Unanswered questions