Daw integration with Logic Pro 11 doesn't work properly

Jeroen_71 · 2025-07-13T20:51:16+00:00

There was an error rendering this rich post.

when I open a project in Logic Pro 11 , the screen on my s88 III shows 1 instrument,

when I select a different track in Logic the screen stays on the same 1st instrument.

When I click the Daw button on my s88 the screen turns black and I can't control my daw from the keyboard and I can't return to the browser or plugin.

Only when I open a new instrument the screen on my s88 works again.

I tried everything but I can't find the solution. Please help.

Find more posts tagged with

Komplete Kontrol Keyboards

Accepted answers

All comments

Uwe303

Hello,

so the transport buttons work? Maybe delete the keyboard from logic and add it back again as controller device. Also check if all is up to date, also the keyboard, by opening komplete kontrol stand alone. This might also help:

https://support.native-instruments.com/hc/en-us/articles/211841245-My-Komplete-Kontrol-Keyboard-is-Not-Automatically-Recognized-by-Logic-Pro

Jeremy_NI

https://community.native-instruments.com/discussion/46581/daw-integration-with-logic-pro-11-doesnt-work-properly

Do Komplete Kontrol, the Hardware Connection Service and Logic both have full disk access? How to Enable Full Disk Access on macOS

How is the keyboard connected? Can you check this out? Kontrol S-Series MK3: Avoiding Connection Issues by Using the Right USB-C Hubs and Cables

If issue still happens, try the following: https://knowledge.apogeedigital.com/how-to-reset-logic-pro-trash-preferences

Jeroen_71

The hardware connection service didn't have full disk access. I changed that. Didn't help unfortunately.

The keyboard is connected via usb-c ) the cable that came with the keyboard)

I have also reset Logic Pro…that also didn't help. Thanks for your comments.

Uwe303

Does the keyboard work at least with kk stand alone, I guess yes. Do you see the three midi ports in the settings of your DAW or komplete kontrol. You can make a picture of the midi ports within kk prefs.

Jeroen_71

Schermafbeelding 2025-07-15 om 22.35.27.png

here is a screenshot of my Komplete Kontrol preferences

Jeroen_71

I don;t know what happened but my midi preferences just disappeared from Logic. When I go to Logic Pro- settings there is no midi settings anymore. Maybe because I did a reset of Logic Pro? Oh my god a new problem.

Jeroen_71

last comment is my bad. I found the solution.

Uwe303

Ok all midi ports there that should be there, do you have added a controller surface (kk mk3) or was it automatically added within logic?

Gerold Altwirth

Same Issue here! Please, what is the solution??

Uwe303

https://community.native-instruments.com/discussion/comment/234301#Comment_234301

Please try the stuff from the first posts your issue could have a different cause.

Jeremy_NI

https://community.native-instruments.com/discussion/comment/234290#Comment_234290

Only the Main input is necessary here. Please untick the other ones. Is everything functional in Komplete Kontrol in standalone? Are you able to browse, load, play and control a preset from the keyboard?

What is your operating system? On Sequoia there are a few more things to check: How to grant audio apps access to your local network on macOS 15 Sequoia

Quick links

Unanswered questions