My Playhead Is Completely Gone

azanvettor
azanvettor Member Posts: 12 Newcomer

I was recording with my Maschine a couple of days ago, hopped back on and then poof no Playhead, any ideas?

Answers

  • LostInFoundation
    LostInFoundation Member Posts: 4,194 Expert
    edited May 2023

    Probably it has something to do with audio settings. Check in preferences what is selected and try to make some changes.

    Do you use an audio interface?

    Edit: oh…I see now you are the same guy from the other thread. Now that you call it playhead and not “the line that follows the recording” I did understand you better 😂

  • azanvettor
    azanvettor Member Posts: 12 Newcomer

    I tried all available audio settings. None fixed my problem. It's recording what I'm playing just not repeating it when I play it back

  • LostInFoundation
    LostInFoundation Member Posts: 4,194 Expert
    edited May 2023

    Is the timeline even moving? When you push play, something is happening or you don’t have any reaction at all by Maschine?

    The only time I saw Maschine “stuck” without the playhead moving when pushing play was because of audio settings. Which driver do you use? Asio? WASAPI?

  • azanvettor
    azanvettor Member Posts: 12 Newcomer

    The timeline is moving, Output is "unplugged headphones L and R" and "Speakers L and R", not working for other groups

  • azanvettor
    azanvettor Member Posts: 12 Newcomer

    Actually I think the playhead is moving it's just not playing anything

  • LostInFoundation
    LostInFoundation Member Posts: 4,194 Expert
    edited May 2023

    Ah…ok…so the thing is different…

    Can I see some picture of the audio settings/routings (the ones in the preferences and the ones for the sound/group/master)?

    Oh…also…specify if you are using an audio interface or computer internal


  • azanvettor
    azanvettor Member Posts: 12 Newcomer

    This is what I have

  • LostInFoundation
    LostInFoundation Member Posts: 4,194 Expert

    First thing I notice: driver: WASAPI (exclusive mode). Do you have any other program open using sound?

    Try just to change the driver in Asio (or WASAPI shared mode)

  • azanvettor
    azanvettor Member Posts: 12 Newcomer

    nothing changed

  • LostInFoundation
    LostInFoundation Member Posts: 4,194 Expert
    edited May 2023

    Did you restart Maschine after changes?

    And also…which choices you have under Device?

  • azanvettor
    azanvettor Member Posts: 12 Newcomer

    It does say "Error loading Project" when I click on Maschine 2, could that mean something?

  • D-One
    D-One Moderator Posts: 2,811 mod

    IDK what's going on there but I see empty projects... In Ideas View, there is no place for a playhead to exist if there are no Patterns active, so add at least one while you're testing the audio out stuff.

  • 6xes
    6xes Member Posts: 630 Pro
    edited May 2023

    the speakers L+R should be on channels 1 & 2(not 3/4) respectively also on maschine output 1 & 2

    they are always considered your main outs.....

    also understand that

    maschine output 1L & maschine output 1R is equivalent to Ext 1

    maschine output 2L & maschine output 2R is equivalent to Ext 2

    maschine output 3L & maschine output 3R is equivalent to Ext 3 and so on


    useful if you want to separately route groups or sounds to specific outputs(hardware normally speakers headphones etc, this is only possible if your hardware supports extra channels)

  • azanvettor
    azanvettor Member Posts: 12 Newcomer

    Y'all are lifesavers! it's working again, thank you so much!!

Back To Top