Xone 96 and Focusrite 18i20 Routing

Jccg
Jccg Member Posts: 1 Newcomer
in Traktor Software & Hardware

Setup for TRAKTOR DJ to send the Main Output and the Monitor Output (headphones) to two separate stereo output pairs of your audio interface.

There is this article : https://support.native-instruments.com/hc/en-us/articles/210300885-How-to-Use-TRAKTOR-DJ-with-an-External-Audio-Interface?_ga=2.48942118.1621710239.1680778923-1736029837.1679101625#:~:text=How%20to%20Use%20TRAKTOR%20DJ%20with%20an%20External%20Audio%20Interface

But it does not help me much with my set up . (Traktor Pro3|Xone 96 | Focusrite 18i20|Laptop)

I don't have Traktor Audio 6/10 .

Master Out is only available when mix mode is external.

Laptop :

Processor 12th Gen Intel(R) Core(TM) i7-1260P  2.10 GHz

Installed RAM 16.0 GB (15.7 GB usable)

System type 64-bit operating system, x64-based processor

PXL_20230407_111221924~2[1].jpg


PXL_20230407_111221924~2[1].jpg

Traktor Pro 3 | Allen n Heath Zone 96 | Focusrite 18i20 3rd Gen.

Thank you.

Best Answer

  • Stevan
    Stevan Traktor Mapping Mod Posts: 1,654 mod
    edited April 2023 Answer ✓

    That's the article on TRAKTOR DJ and you are using Traktor Pro 3 which is a different app.

    Why don't you use built in audio interfaces of 96? No audio cables required, just one USB.

Answers

  • Stevan
    Stevan Traktor Mapping Mod Posts: 1,654 mod
    edited April 2023 Answer ✓

    That's the article on TRAKTOR DJ and you are using Traktor Pro 3 which is a different app.

    Why don't you use built in audio interfaces of 96? No audio cables required, just one USB.

  • Uwe303
    Uwe303 Moderator Posts: 3,038 mod
    edited April 2023

    Hello,

    why you don't use the mixer and traktor in external mixing mode? Then you use the main and headphones out of the xone 96 (of course not available in traktor if you use external mixing mode) . You can of course route everything through the focusrite, but then you don't need the mixer. You then simply route master to 1-2 and headphones to 7-8 (headphones out 1), maybe you have to use the focusrite mixer to route everything there too. Maybe you describe simply what exactly you want to have, what should go from what to what and so on, there are many options. Like i said i would use the mixers interface and external mixing mode, you then don't need the focusrite at all.

Back To Top

Categories