Komplete Audio 6 WHITE NOISE (extremeeely annoying)

ariansalehi
ariansalehi Member Posts: 1 Newcomer

maaan i'm really about to punch my wall.

every time i want to record something in my daw for example a guitar this annoying white noise starts coming.

i really don't know what to do i tried every possible setting

Answers

  • Gee_Flat
    Gee_Flat Member Posts: 906 Guru

    Wall 1, Hand 0 😁 Better off using a 5 lb. sledgehammer or the soundcard... or a sledge on the soundcard hahaha!

    Just with a guitar, or anything plugged in?

  • Jeremy_NI
    Jeremy_NI Customer Care Posts: 9,321 mod
  • DanielTeeBee7
    DanielTeeBee7 Member Posts: 1 Member
    edited March 2023

    getting the same on my Komplete audio 2. I have a device chain setup like this:

    MK3->SP404mk2->Komplete audio 2

    They are connected via RCA cables with a 1/4inch adapter. When I am listening to the host signal on the interface, I get no noise. When i switch the knob to the input, I hear a lot of noise. I plugged in my headphones to my SP and I hear noise coming from the MK3 too. Not sure how to fix... I did check the article Jeremy posted but didn't help

  • Jeremy_NI
    Jeremy_NI Customer Care Posts: 9,321 mod

    @DanielTeeBee7 I'm not sure what's the culprit in your case, what if you only connect the SP404 to the Komplete Audio 2? Do you still get noise? If you connect the Mk3 to the KA32 do you get noise? What kind of signal the SP404 is supposed to get?

Back To Top