Xone 96 as a traktor MIDI controller?

frankzbruckmann
frankzbruckmann Member Posts: 36 Member
edited February 27 in Mapping Traktor

Hi once I had connected the pc with mi mixer Allen & Heath xone 96 and when I pushed the filter button the track in deck a was restarted, so I know xone 96 can send and receive MIDI signals to traktor but the problem is that I don't know have to map the mixer in traktor somebody knows?

Best Answers

  • Uwe303
    Uwe303 Moderator Posts: 2,966 mod
    edited March 2023 Answer ✓

    Hello,

    found mappings here Traktor Pro 3 Xone 96 - foxsuite (website2.me), unfortunately DJTT mapping seems to be down, normally the source of good mappings. There are also tutorials about mapping on yt for example, like that: Traktor for Beginners: Basic Mapping - YouTube

  • PZZO
    PZZO Member Posts: 18 Helper
    Answer ✓

    You might want to check out this guide to get you started on midi mapping (device is Generic MIDI, and make sure your In-port and Out-port is the Xone 96):

    https://support.native-instruments.com/hc/en-us/articles/209570969-How-to-Set-Up-a-Generic-MIDI-Controller-in-TRAKTOR

    This is a guide of what you can map on the Xone 96. Traktor should know how to "Learn" them as you do stuff on the mixer, but the guide can also tell you what notes exactly would do what if you need it:

    https://www.allen-heath.com/media/X96_MIDI-Control-Overview.pdf

    Happy mapping!

Answers

  • Uwe303
    Uwe303 Moderator Posts: 2,966 mod
    edited March 2023 Answer ✓

    Hello,

    found mappings here Traktor Pro 3 Xone 96 - foxsuite (website2.me), unfortunately DJTT mapping seems to be down, normally the source of good mappings. There are also tutorials about mapping on yt for example, like that: Traktor for Beginners: Basic Mapping - YouTube

  • Stevan
    Stevan Traktor Mapping Mod Posts: 1,621 mod

    96's are used best as an external mixers. But also easy to midi map.

    Is there a reason why you want to go internal mixing?

  • frankzbruckmann
    frankzbruckmann Member Posts: 36 Member

    Hi thanks for the advice, i want to map midi for some tests i want to do in traktor with xone 96 midi capabilities

  • frankzbruckmann
    frankzbruckmann Member Posts: 36 Member

    for me the mixer in the middle of nexus and dj v9 from pioneer is the xone 96

  • PZZO
    PZZO Member Posts: 18 Helper
    Answer ✓

    You might want to check out this guide to get you started on midi mapping (device is Generic MIDI, and make sure your In-port and Out-port is the Xone 96):

    https://support.native-instruments.com/hc/en-us/articles/209570969-How-to-Set-Up-a-Generic-MIDI-Controller-in-TRAKTOR

    This is a guide of what you can map on the Xone 96. Traktor should know how to "Learn" them as you do stuff on the mixer, but the guide can also tell you what notes exactly would do what if you need it:

    https://www.allen-heath.com/media/X96_MIDI-Control-Overview.pdf

    Happy mapping!

Back To Top