Maschine plus controller mode not working
hello my machine + doesn't work in controller mode after I proceeded as described in the instructions.. after I pressed the controller mode button in the settings menu, the machine shuts down and the power button lights up orange and if I press (shift+ channel-midi or shift+ plugin) but nothing happens...according to the description it should appear in the left display "template". it only says machine + I just don't know which button is meant by button 4?
I have read different threads on different sites without success.
Make sure your MASCHINE+ is not connected to your computer. Turn on your MASCHINE+. Once it has started, connect your MASCHINE+ to your computer with a USB cable. Press the SETTINGS button on your controller. Switch to the System tab. Press button 4 (CONTROLLER).
Comments
-
You want to use M+ but to connect to computer and use it to control Maschine 2 on the computer? I do like this and it works every time:
- Disconnect the power cable from your power source and M+ completely.
- start your computer.
- connect usb cable between computer and M+. DO NOT PLUG IN POWER ADAPTER.
- Start Maschine 2 on your computer.
- should work fine. Do not connect the power adapter at all for use with computer.
When you want to go back to standalone usage:
- Quit maschine 2 on your computer.
- when Maschine 2 is completely closed, remove usb cable completely.
- connect power adapter.
- turn on M+ and enjoy life.
3 -
Sounds laborious. Am Not Happy with that. Is there ni other solution? A lot of people seem to have this problem. But ty at first iwill try IT on the Weekend.
0 -
To me it seems easier to just disconnect power cable completely and just have it connected with the usb cable to the computer. Hope it works for you!
0 -
It's VERY simple.
- Standalone: use the power adapter (unplug USB-B from computer if connected)
- Controller: use the USB-B to computer (unplug power adapter)
That's it. Forget about all the rest of it. 😉
3 -
2 cows mooing the same thing with a different moooo ;)
2 -
Did it worked? I have the same problem :S
0 -
yes worked for me thanks👍️
0 -
I had the same problem and when I came here to the thread and read the solution it did work for me
0 -
I have this problem, but the solution above does not work, and the Maschine+ is not recognised in the osx system profiler. It previously did work. The large/square USB port also wobbles quite a lot.
0 -
Ignore my comment above - I was having a brain fart
1 -
Thanks! It works for me with the adapter but you have to do it backwards - attach USB first, then turn on M+ then system, etc, etc. To exit, you have to shutdown maschine first, then switch into standalone to exit properly. Just using USB port solves that problem - much easier!
0
Categories
- All Categories
- 18 Welcome
- 949 Hangout
- 56 NI News
- 471 Tech Talks
- 2.5K Native Access
- 11.1K Komplete
- 1.3K Komplete General
- 3K Komplete Kontrol
- 3.9K Kontakt
- 842 Reaktor
- 298 Battery 4
- 611 Guitar Rig & FX
- 325 Massive X & Synths
- 761 Other Software & Hardware
- 4.1K Maschine
- 4.8K Traktor
- 4.8K Traktor Software & Hardware
- Check out everything you can do
- Create an account
- See member benefits
- Answer questions
- Ask the community
- See product news
- Connect with creators