S61 MK1 Modulation Strip in Logic

rwear
rwear Member Posts: 2 Member
in Komplete Kontrol

Hi- My S61 MK1 keyboard is working fine in Komplete Kontrol as a standalone, but in Logic, the pitch strip transmits, but the modulation strip doesn't so this definitely seems to be an issue in Logic.

Perhaps the fix is to remove the profile for the S61 in Logic and re-add, is there another fix and can someone point me in the right direction?

Thank you!

Tagged:

Best Answer

  • Jeremy_NI
    Jeremy_NI Customer Care Posts: 9,670 mod
    Answer ✓

    @rwear You could check in Controller Editor if something else than CC#1 is assigned to the mod strip. Then check if something in Logic is assigned to CC1 (or another CC). You can also try resertting Logic to default, as explained in this article from Apple: https://support.apple.com/en-us/HT200260

Answers

  • Jeremy_NI
    Jeremy_NI Customer Care Posts: 9,670 mod
    Answer ✓

    @rwear You could check in Controller Editor if something else than CC#1 is assigned to the mod strip. Then check if something in Logic is assigned to CC1 (or another CC). You can also try resertting Logic to default, as explained in this article from Apple: https://support.apple.com/en-us/HT200260

Back To Top

Categories