Mikro MK2 doesn't work in my DAWs

AaronNiduk · July 2022

Hi all.

Bought a used MASCHINE Mikro mk2

Connected to the laptop, installed the drivers.

Mikro works with Maschine and shows up in Controler Edit but I can't seem to use it as a controller in my DAW

I have Studio One 5 and Fl Studio and they just don't see it.

I tried to set midi settings, but there are no sends from Mikro

SHIFT F1 turned on, nothing helps.

Device Updater does not see it either.

I don't understand what's going on!

Monochrome · July 2022

Do these articles help? Or, have you read them already?

https://support.native-instruments.com/hc/en-us/articles/360012819498--Setting-up-Your-MASCHINE-Controller-for-Host-Transport-Control-in-Studio-One

https://support.native-instruments.com/hc/en-us/articles/210305785-Setting-up-Your-MASCHINE-Controller-for-Host-Transport-Control-in-FL-Studio

Monochrome · July 2022

Do these articles help? Or, have you read them already?

https://support.native-instruments.com/hc/en-us/articles/360012819498--Setting-up-Your-MASCHINE-Controller-for-Host-Transport-Control-in-Studio-One

https://support.native-instruments.com/hc/en-us/articles/210305785-Setting-up-Your-MASCHINE-Controller-for-Host-Transport-Control-in-FL-Studio

Nico_NI · July 2022

Hey @AaronNiduk, any update to share regarding the troubleshooting?

Ben E Badman · September 2023

I am having the same problem with Maschine Mk2 under Windows 10. It is registered and the firmware is up to date. It works with NI Maschine2 and Controller Editor but does not work with any 3rd party apps. When switched to midi controller mode, there is no midi traffic on either the USB link or midi port except between NI Maschine or CE. I know the hardware is fine because midi mode works plugged into my old MacBook.

Windows Device Manager reports that the device has no driver installed. NI Mashine Mk2 driver Ver 304 will not install - it reports a missing network path. I have raised a trouble ticket with NI support, but, after 3 or 4 days still no fix. Does anyone have suggestions?

Mikro MK2 doesn't work in my DAWs

Best Answer

Answers

Categories