Traktor Scratch Audio 6 - Loud whistle

nickydj76
nickydj76 Member Posts: 1 Newcomer
edited January 2022 in Traktor Software & Hardware

Hi I just bought traktor audio 6 ho, as a mixer I have a urei 1620, I connected everything correctly, but the vinyl sees it traktor pro 3, but as soon as I put the needle in the vinyl, it makes a very loud whistle ... can you help me?

I've always used vinyls and cds, so I'm not very experienced ..

Thank you

Nicky

Tagged:

Answers

  • Jezze
    Jezze Member Posts: 1 Member

    Do you have an audio interface between the mixer and the turntable? The sound of the digital record is indeed a high pitched whistle, which traktor translate to the position on the record.

    Setup: the turntable out goes into the audio interface and the audio interface into your urei (as line).

  • Wyley
    Wyley Member Posts: 239 Pro

    Computer specs pls.

    If you are on a Mac check the os security settings and enable Traktor in the mic settings.

    Also click on the deck letter on the Traktor deck and set to scratch control.

  • Karlos Santos
    Karlos Santos Member Posts: 136 Advisor
    edited February 2022

    It sounds like you are hearing the timecode through your speakers.

    Where you see the letter A and B in each deck, click on the little arrow under the letter and and select Scratch Control.

    Let us know how you get on.

    Karlos.

  • Nico_NI
    Nico_NI Administrator Posts: 1,124 admin

    @nickydj76 Feel free to share with us if you managed to figure out the issue 😉

Back To Top