Sampling Roland TR-8s misses the first beat
When Maschine 2 is set to send clock it always miss the first or part of the first beat if i try to record my TR-8s. Changing the Offset makes it worse.
only if i switch from send to receive clock and adjust the offset to -10 it sample correctly.
But it‘ annoying to change that everytime
Audio is set to 48khz and the buffer to 32. The TR-8s is connected via USB for Midi and Audio.
is there anything else i can do?
Comments
-
Does it miss just the first beat and then it falls back in sync?
Latency is pretty common especially when USB handles MIDI and Audio.
1 -
Hello,
you can simply record a longer part, lets say 2 and a half duration's, and edit it, that is quicker than changing clock send/receive back and forth. Start and endpoint is quickly set, or maybe you chop it up.
Uwe
1 -
No it's all shift to the left.
But I think I found a solution.
if I press Restart and wait for few seconds before pressing start (sampling) to record it works fine !
Seems the problem occurred if I press start (sampling) and then press Restart I get the late recording.
1 -
Cool to hear it's working this way :)
0
Categories
- All Categories
- 21 Welcome
- 2.1K Hangout
- 86 NI News
- 1.5K Tech Talks
- 2.6K Native Access
- 14.2K Komplete
- 1.4K Komplete General
- 3.1K Komplete Kontrol
- 4K Kontakt
- 3.6K Reaktor
- 342 Battery 4
- 636 Guitar Rig & FX
- 327 Massive X & Synths
- 789 Other Software & Hardware
- 4.2K Maschine
- 5.2K Traktor
- 4.9K Traktor Software & Hardware
- Check out everything you can do
- Create an account
- See member benefits
- Answer questions
- Ask the community
- See product news
- Connect with creators